MNL 100 HP – UV Laser
The MNL 100 HP nitrogen laser from LTB is representing the cutting edge in small compact UV lasers. It does not need an external gas supply. With a total volume of less than 3 litres, it weigths approx. 3.5 kg.
- Wavelength 337.1 nm
- up to 200 µJ pulse energy
- Extremely long operating life through a sealed discharge cartridge in metal-ceramic technology
- High precision through a directly switching solid state power switch
- Warranty 60 million pulses
- Patented
- Certifications: CE, ETL-Report No. 05KFI005386 (UL, CSA, VDE, Semco), ROHS, FDA
- Compatible with VSL337i OEM, VSL-337-ND
Setup
The Mini Nitrogen Laser MNL 100 HP is characterized by its long lifetime, low energy decay and high precision. In comparison to the standard MNL100 models the High Power version provides a significant higher pulse energy.
This is achieved by the patented innovations
- sealed cartridge in metal-ceramic technology and
- directly switching solid state power switch.
60 million laser pulses or the maintenance-free operation over 2 years are guaranteed. The integrated laser controller makes a large number of presettings possible as well as the easy adaptation t o different applications. The firmware provides the possibility to adjust and control all laser functions and parameters via the interface to the PC. All trigger in- and outputs are monitored by the trigger management. The air-cooled laser is supplied with a low voltage of 24 V DC. A wide-range power supply is part of the delivery (100 – 240 V, 50 – 60 Hz).
The MNL 100 HP is largely compatible to the lasers of this class on the market and has got the certifications necessary for all international markets. CE, ETL Report No. 05KFI005386 (UL, CSA, VDE, Semco), ROHS, FDA.
Specifications
| Basic equipment | Pulse repetition rate up to 60 Hz |
| Available also as low-divergent version | |
| Integrated controller | |
| Trigger management | |
| Laser pulse counter, calibration, logbook function | |
| Serial interface: DLL or bus protocol | |
| Interface converter RS 232 to optical | |
| Options | Operation without PC possible |
| Laser energy can be varied by the user | |
| Integrated energy monitor | |
| Integrated continuous attenuator module up to 1 : 10,000 | |
| Optical trigger (Jitter < 200 ps) | |
| Integrated fibre coupling | |
| Laser can be equipped with a fibre (200 – 1,000 µm) | |
| Adapter USB to RS232 |
Models
>
|
General |
PD series | LD series | |||
|---|---|---|---|---|---|
| MNL 103-HP PD |
MNL 106-HP PD |
MNL 103-HP LD |
MNL 106-HP LD |
||
| Wavelength | nm | 337.1 | |||
| Spectral bandwidth | nm | 0.1 | |||
| Guaranteed pulse energy (90% after 60 million pulses) 1 | µJ | ≥ 200 | ≥ 180 | ≥ 130 | ≥ 115 |
| Typ. pulse energy @ pulse quantity | µJ @ Mio | 180 @ 100 | 160 @ 100 | 115 @ 100 | 100 @ 100 |
| Pulse halfwidth FWHM, typ. | ns | 3 | |||
| Pulse power, typ. | kW | 65 | 60 | 43 | 38 |
| Repetition rate | Hz | 1…30 | 1…60 | 1…30 | 1…60 |
| Energy stability SD | % | ≤ 2 | |||
| Beam dimensions, vertical x horizontal, typ. | mm | 3 x 4 | 4 x 2.5 | ||
| Beam divergence, vertical x horizontal 2 | mrad | ≤ 3.5 x ≤ 3 | ≤ 0.5 x ≤ 0.3 | ||
| Focus stability 3 | µm | < 15 | < 25 | ||
| Beam exit angle, vertical x horizontal, typ. | deg | 0.5 (± 0.2) x 0 ± 0.1 | 0 ± 0.1 x 0 ± 0.1 | ||
| Trigger In | Optical or electrical (TTL) | ||||
| Jitter: ext. trigger – laser pulse | ns | ± 2.5 | |||
| Pulse delay: ext. trigger – laser pulse | ns | 1,300 ± 10% | |||
| Sync Out (optional) | 3.5 ns before laser pulse (U > 4 V) | ||||
| Jitter: electr. trigger exit – laser pulse | ns | < 0.2 | |||
| Warm-up time | s | < 20 | |||
| Control | Automode or software (DLL) via integrated controller | ||||
| Warranty 4 | Min. 90% from specified start energy after 60 million pulses or 2 years | ||||
| Certifications | CE, ETL, (UL, CSA, VDE, Semco), FDA | ||||
| Laser class | 3B / IIIb | ||||
|
Electrical interface |
MNL 100 HP | ||
|---|---|---|---|
| Power supply 5 | V DC | 24 | |
| Power consumption | A | 2.4 | |
| Maximum / Average power consumption | VA | 60 / 40 | |
|
Operating conditions |
|||
| Operating temperature | °C | +15…+38 | |
| Storage temperature | °C | -10…+60 | |
| Max. relative humidity (non-condensing) | % | 85 | |
| Air pressure | mbar | 750 – 1,300 | |
| Dimensions (L x W x H) 6 | mm | 321 x 95 x 95 | |
| Weight | kg | 3.5 | |
| Dimensions of the power supply (L x W x H) | mm | 180 x 80 x 50 | |
| Weight of the power supply | kg | 0.6 | |
1 higher energies on request
2 at max. rep. rate; measuring at 5 m distance
3 based on focusing of 200 mm
4 extension by 1 year possible
5 via external wide-range power supply (90 … 260 V AC) (part of the delivery)
6 with attenuator module 335 x 95 x 95 mm
Subject to technical changes without notice
Applications
- OEM laser source
- MALDI-TOF mass spectroscopy
- Ion trap mass spectroscopy
- Laser-induced fluorescence spectroscopy (LIF)
- Fluorescence Intensity (FLINT; FI)
- Fluorescence Polarization (FP)
- Fluorescence Resonance Energy Transfer (FRET)
- Homogenous Time Resolved Fluorescence (HTRF)
- Nano-TRF
- Fluorescence Lifetime Analysis (FLA; FLT)
- Pump source for dye lasers
- Amplification of ultra-short laser pulses
- Micro LIBS
- Laser ablation
- Microstructuring
- Dissecting cells under the microscope
- Pulsed laser Photoacoustics
- Laser optoacoustics
- Detector calibration
- Technological applications such as laser-induced bonding, hardening and cleaning
Accessories
Fibers
Multimode quarz fibers for laser & spectrometer coupling
Joule Meter
Very compact energy meter with high sensitivity